The SureFlap Microchip Pet Door Connect uses your pet’s existing microchip like an electronic door key to allow them to come and go from the home without leaving doors and windows open. The included hub and app mean that the permissions of the door be controlled on your phone, wherever you are!
The included hub is connected to your home router with the included Ethernet cable and gives you wireless control. You can receive notifications when your pet leaves or enters the home, lock and unlock the door via time scheduling or manually. It provides alerts when a neighbourhood pet tries to access your home and it offers insights to your furry friend’s behaviour. To use the hub, you are required to have iOs9 or later and Android 4.4 or later. The app requires you to be connected to the internet (mobile or wireless broadband).
Note that the Sureflap Pet Door Connect doesn’t allow you to programmes different curfews for different pets. If the door is unlocked, all of your pets can exit the home.
When installing into glass, the SureFlap Mounting Adapter is required. This is because glass requires a circular hole. The mounting adapter ensures that the flap fits into the glass correctly with no gaps. The adapter can also be used when installing into a wall as it leaves a smooth and clean finish.
If installing into a wall, you may require a SureFlap Tunnel Extender. The tunnel extender creates a longer approach tunnel for thicker walls. Each extender adds 50mm of length.
Reads your pet’s existing microchip to allow entry for your pets
Suitable for large cats and small dogs
Requires 4 x C batteries (provide up to 6 months battery life)
Hub included that connects to your router (mains powered)
Control your pet door from anywhere in the world
Receive notifications when your pet enters and leaves the home
Lock or unlock the pet door, change the curfew times at anytime
Gain insights into your pet’s behaviour
App requires iOS9, Android 4.4 or later
Can be accessed on a pc, requires latest versions of Chrome, Firefox, Internet Explorer or Safari
Receive intruder alerts if a pet that isn’t registered tried to enter
Measurements:
Flap opening size (the smallest area your pet will have to enter) - 178mm (W) x 170mm (H)
Door/wall mounting hole size - 207mm (W) x 234mm (H)
Glass mounting hole size (a circular hole is required) - The optimum hole size is 300mm in diameter, but it can be installed in holes up to 320mm in diameter
Exterior frame size - 262mm (W) x 281mm (H)
One-time delivery
Deliver Every:
Start saving with 10% off your first subscription. Update or cancel anytime.
Add to upcoming subscription order and receive 10% off
Select ‘Get one time’ to add this item as a one-off to your next subscription, or choose a delivery frequency to start a new subscription.
Get one-time Start a new subscription (10% off your first order).
Deliver Every
You will receive this item in your next order on
You will receive this item in your next order on
Couldn't load pickup availability
Additional Information
Installation Instructions:
The presence of a metal plate in an installation location can influence the performance of the DualScan Microchip Cat Flap, reducing the range of the microchip reader.
This includes the following:
Metal skin doors
Security doors
Metal garage doors
UPVC coated metal doors
Metal frames around a wall installation
For most situations you will not notice anything, as the read range will still be sufficient for the majority of microchips. However, if you experience intermittent operation or failure to open for your cat, first check for the presence of a metal plate in your installed location.
Note: UPVC coated metal doors often look the same as standard UPVC doors and you may need to look carefully where the panel has been cut. If a metal plate is confirmed, follow the instructions below for improved read range.
If there is metal present, you will need to cut a larger hole in your door, leaving a gap of 2-3cm (1-1.2”) between the tunnel of the cat flap and the metal in your door. To begin with, trace around the outer edge of the back frame as a size guide. Now mark your cutting line 1cm (0.3”) inside the line you have traced around the back frame, leaving the screw holes in place. Cut this hole and reinstall the cat flap. If you still experience intermittent operation you will need to increase the size of the hole again, in this case you will require the cat flap mounting adaptor. Once you have the mounting adaptor, trace around the circumference of the mounting adaptor as a guide. Now mark a circle approximately 2cm inside the line from the mounting adaptor, again leaving the indentations for the screw holes. Cut this hole and then reinstall the cat flap again. This will extend the read range further and should resolve any issues with mounting in a metal door.
